IDA8S Slave Controllers

IDA8 is a third-generation modular system that complies with current architectural demands requiring IP and/or fibre-optic networking to allow for even the most complex of system designs.

IDA8S, SAB & SL controllers are EN54-16 certified for use on Public Address and Voice Alarm systems and compliant to UL60065, ISO 7240-16, BS EN 50849, BS6259 & BS5839 Parts 8 & 9, with specific attributes for compliance in large installations. All system Components and peripherals are monitored. This monitoring extends from the capsule of a paging microphone to the end of a loudspeaker line. The external cables Connected to the control inputs are monitored for short and open circuit and an internally generated pilot tone is available for monitoring impedance on the loudspeaker lines.

The IDA8SAB, IDA8S slave units house advanced audio digital signal processing (DSP), matrix control functions and a digital message player, along with amplifier monitoring with hot-swap amplifiers and loudspeaker line-impedance monitoring. Each input and output channel is fitted with a wide range of pre-and post-processing devices such as volume controllers, routing mixers and switches, priority and paging components, equalizers, compressors, limiters and delay-lines.

Models

IDA8SAB

IDA8SAB Slave Controller

Key Technical Specs

Power supply: 230/115 VAC ±15%, 50/60 Hz

Power consumption: 48 W

Battery power supply: 18 - 30 VDC

Frequency response: ±1 dB @ 20 Hz and 20 kHz

Dimensions (HxWxD): 2RU, 88 x 486 x 289 mm (3-1/2" x 19" x 11-3/8") with brackets

Weight: 5 kg (11 lbs)

Mounting: 19"-rack mount

Color: RAL7016

IDA8S

IDA8S Slave Controller

Key Features

Audio channels: up to 48 simultaneous per local network

Zones local network: up to 256

Zones global network: up to 8,192

Audio inputs: 8 full digital audio inputs

Audio outputs: 8 full digital audio outputs

Dedicated IO: 2 dedicated audio in & outputs for amplifier backup

Dedicated PDC ports: 4 dedicated & monitored ports

Supervised control inputs: 9

Control outputs: 8

Outputs: 1 fault & 1 EVAC relay outputs