PPM & PSM General Paging Microphones

The PPM & PSMs paging console are available in the following options for the IDA8 & DIVA controllers.

The PPM-IT5 is an IP, POE desk top paging console which enables paging and intercom communication with all of the TERRACOM devices. It can also be used with the IDA8 & DIVA Controllers for use as a PA microphone and integration of the TERRACOM products. It is fitted with a 5" TFT touch screen interface, which allows call-paging, message broadcast and DSP matrix parameter control over a secure (monitored) bus. The backlit full-colour touch screen is designed for simple, user-friendly operation and offers a total of 168 software keys across 14 pages for zone or group zone selection. Each key contains a colour-changing field indicating that the zone is occupied by a different process.

PPM-AS is a unidirectional, addressable desk top paging microphone for use as a PA microphone for the IDA8 system. It is full monitored in accordance with BS5839 but not EN54-16 certified, it is monitored by using RS485 protocol over STP CAT5/6 cable. The paging console has a gooseneck microphone, a push-to-talk button, 8 zone selection keys and a monitor speaker. All buttons can be programmed from ATEÏS Studio software.

PSM-8 has the same functions and is identical to the PPM-AS but is loaded with different firmware to work with the DIVA system.

PPM-IT5 Paging Console

PPM-IT5 Paging Console

Key Technical Specs

Voltage: 18 - 26 VDC

Power consumption: 250 mA

Frequency response: -3 dB @ 200 Hz to 8 kHz

THD: < 1% @ 1 kHz

Output impedance: 100 Ω

PPM-AS Programmable Paging Microphone

PPM-AS Programmable Paging Microphone

Key Technical Specs

Voltage: 18 - 26 VDC

Power consumption: 120 mA

Frequency response: ±3 dB @ 200 Hz to 8 kHz

THD: < 1% @ 1 kHz

Output impedance: 100 Ω