Weatherproof Plastic Horn Loudspeakers
The PH & APH range of weatherproof, lightweight plastic re-entrant horns have been designed for high quality sound reinforcement. Manufactured from a strengthened ABS moulded plastic with UV inhibitors. The APH Horns are EN54-24 certified and are Low smoke zero Halogen UL-94V0. The Horns are supplied with a high grade epoxy coated U bracket. These horns are non-corrosive and resistant to salt laden air.
The PH & APH range of plastic horns are fitted, as standard, with 1 x PG9 gland but will open to 20mm + 1 x 20mm knockout allowing the installer to loop in loop out the cabling thus avoiding the need for an additional junction box. (Excluding the PH10T). Our standard finish is grey, RAL7035, however alternative finishes are available upon request.
Offering high efficiency and clarity of speech, these horns are suitable for speech or signal warnings in hostile environments. They are also ideal for marine and industrial applications as they are unaffected by most chemicals.
Models
PH10/T
Key Technical Specs
Rated power: 10W
Tappings 100V line: 10/5/2.5/1.25W
Driver impedance: 20Ω
Material: ABS Plastic Housing with UV Inhibitor
Mounting: Stainless Steel U Bracket
PH10/TC *
Key Technical Specs
Rated power: 10W
Tappings 100V line: 10/5/2.5/1.25W
Driver impedance: 20Ω
Material: ABS Plastic Housing with UV Inhibitor
Mounting: Stainless Steel U Bracket
APH10T/ENC
Key Technical Specs
Rated power: 10W
Tappings 100V line: 10/5/2.5/1.25W
Driver impedance: 8Ω
Material: Low Smoke Zero Halogen UL-94V0 Plastic with UV Inhibitors
Mounting: Stainless Steel U Bracket and Hardware
PH20/T
Key Technical Specs
Rated power: 20W
Tappings 100V line: 20/10/5/2.5W
Driver impedance: 20Ω
Material: ABS Plastic Housing with UV Inhibitor
Mounting: Stainless Steel U Bracket
PH20/TC *
Key Technical Specs
Rated power: 20W
Tappings 100V line: 20/10/5/2.5W
Driver impedance: 20Ω
Material: ABS Plastic Housing with UV Inhibitor
Mounting: Stainless Steel U Bracket
APH20T/ENC
Key Technical Specs
Rated power: 20W
Tappings 100V line: 20/10/5/2.5W
Driver impedance: 8Ω
Material: Low Smoke Zero Halogen UL-94V0 Plastic with UV Inhibitors
Mounting: Stainless Steel U Bracket and Hardware
PH30/T
Key Technical Specs
Rated power: 30W
Tappings 100V line: 30/15/7.5/3.75W
Driver impedance: 20Ω
Material: ABS Plastic Housing with UV Inhibitor
Mounting: Stainless Steel U Bracket
PH30/TC *
Key Technical Specs
Rated power: 30W
Tappings 100V line: 30/15/7.5/3.75W
Driver impedance: 20Ω
Material: ABS Plastic Housing with UV Inhibitor
Mounting: Stainless Steel U Bracket
APH30T/ENC
Key Technical Specs
Rated power: 30W
Tappings 100V line: 30/15/7.5/3.75W
Driver impedance: 8Ω
Material: Low Smoke Zero Halogen UL-94V0 Plastic with UV Inhibitors
Mounting: Stainless Steel U Bracket and Hardware
* = not stocked in the UK